Monthly Archives: April 2018

Function Loops Tech House Spire Presets

By | April 12, 2018

Function Loops Tech House Spire Presets

Function Loops Tech House Spire Presets
Size 5 Mb

Fresh collection of Spire presets for Tech House producers.

As always, designed from scratch by our sound design masters @ Function Loops HQ.

You will find Bass, Chords, Leads, Stabs and FX presets, all the tools you need right now to get your next trax going in no-time.

Will work well for Techno, Deep Tech & Deep House too.

Details:

• 15 Bass
• 8 Chords
• 11 Leads
• 1 Pad
• 6 Stabs
• 9 Fx
• 50 Presets
• 1 Soundbank

*Other genres that this package may be useful in:

• Deep House
• House
• Techno

Demo Preview:

Mr. Bill’s Tunes Foley Collection Vol. 4 – Outdoors

By | April 12, 2018

Mr. Bill’s Tunes Foley Collection Vol. 4 – Outdoors
Size 27 Mb

This metal-themed, foley pack is exactly as it sounds. FUCKING METAL! These samples are perfect for layering with percussion & transient-based elements to take your average, saggy, 6/10 beat into a mechanical monster that’ll make your friends be like “Woah, did you smack a mormon wearing a chastity belt in the dick with the trucks of your skateboard, record it with an Olympus LS10 field recorder, run away & then layer that on your snare!?”, to which you’ll respond “No, but thank you for asking”.

Spanning over 369 samples totaling 157 MB of disk space, these 44.1kHz, 24-bit files range from percussive, metallic, warehouse recordings such as the sounds of 44-gallon drums, bins being treated like the trash receptacles they are, machinery (such as circular saws), thermos’, storage containers, mesh grates through to the ASMR qualities from nuts & bolts & foil!

Never complain to me that your production doesn’t have enough hard-edged detail to it ever again, because I’ll just link you to this pack & tell you to layer it on your drums! :p

Mr. Bill’s Tunes Folley Collection Vol.3 – Metals

By | April 12, 2018

Mr. Bill’s Tunes Folley Collection Vol.3 – Metals
Size 92 Mb

This metal-themed, foley pack is exactly as it sounds. FUCKING METAL! These samples are perfect for layering with percussion & transient-based elements to take your average, saggy, 6/10 beat into a mechanical monster that’ll make your friends be like “Woah, did you smack a mormon wearing a chastity belt in the dick with the trucks of your skateboard, record it with an Olympus LS10 field recorder, run away & then layer that on your snare!?”, to which you’ll respond “No, but thank you for asking”.

Spanning over 369 samples totaling 157 MB of disk space, these 44.1kHz, 24-bit files range from percussive, metallic, warehouse recordings such as the sounds of 44-gallon drums, bins being treated like the trash receptacles they are, machinery (such as circular saws), thermos’, storage containers, mesh grates through to the ASMR qualities from nuts & bolts & foil!

Never complain to me that your production doesn’t have enough hard-edged detail to it ever again, because I’ll just link you to this pack & tell you to layer it on your drums! :p

Mr. Bill’s Tunes Foley Collection Vol. 2 – Liquids

By | April 12, 2018

Mr. Bill's Tunes Foley Collection Vol. 2 - Liquids

Mr. Bill’s Tunes Foley Collection Vol. 2 – Liquids
Size 600 Mb

Ever wished your music sounded more moist? Ever been listening to a foley-based, glitch artist and thought to yourself “HOW IN THE FLYING FUCK DO THEY GET THIS SHIT SO WET!? THIS GUY MUST BE A SYNTHESIS GOD!”

Well, wonder no more! Bar a few artists, most of them aren’t synthesising that stuff – they’re just nicely recorded water samples, and that’s exactly what you’ll be getting here ?

This pack includes 566, 24-bit, 44.1 kHz files totaling 814MB and is broken down into:

221 x Various hydrophone recordings (that’s a microphone that can go underwater)
125 x Hydrophone recordings taken specifically from a bathtub (from a previously released pack of mine named “Bath Time”)
100 x Random water foley samples I’ve recorded and kept over the past 8 to 10 years
120 x Splash related sounds (coming from both hydraphones & regular condensers)

If you’ve ever watched my layering tutorial, this pack is perfect for that sort of thing!

ADSR Sounds Ableton Wavetable Masterclass

By | April 12, 2018

ADSR Sounds Ableton Wavetable Masterclass

ADSR Sounds Ableton Wavetable Masterclass
Size 420 Mb

Wavetable is the latest synth addition to the Ableton Live 10 Suite. It rounds out the synth devices nicely, bringing a native wavetable synth directly to Live users.

This course provides a thorough walkthrough of all Wavetable’s features and functions. In just 2 hours you will be well prepared to start designing new and inventive sounds. As an added bonus, it also includes 4 bonus sound tutorials loaded with practical tips and tricks to start applying your new skills straight away!

COURSE OVERVIEW

Ableton Wavetable Fast Track to Sound Design is broken up into 10 core parts with an additional 4 bonus lessons dedicated to sound design tips and tricks in Wavetable.. It is just over 2 hours in length and can easily be navigated by user skill level.

If you’ve just picked up your copy of Live 10 and want to see how Wavetable works and how you can start creating some memorable sounds, this course is for you.

COURSE FEATURES

Watch, Listen and Learn – our easy to follow video instruction shows you exactly how to use Ableton’s Wavetable synth
10 walkthrough videos each demonstrating different functions of the synth
► Introduction
► Why Wavetable Synthesis is Unique
► GUI Overview
► Sub Oscillator
► Wavetable Categories
► Oscillator Effect Modes
► Filter Section
► Modulation Sources
► Modulation Matrix
► Global Controls and Unison Modes

4 Bonus Lessons Covering Sound Design with Ableton Wavetable
► Sound Design – Supersaws
► Sound Design – Pads
► Sound Design – Plucky Basses
► Sound Design – Add Presence to Any Sound

Learn at your own pace, watch as many times as you need to learn the lessons

MASTER ABLETON WAVETABLE SYNTH

PT1 – Introduction – This video sets up the course content.
PT2 – Why Wavetable Synthesis is Unique – This section will teach you why and how Wavetable differs from Analog and Operator in Live and how you can leverage the difference to create unique sounds.
PT3 – GUI Overview – To truly learn how to use a synth and use it well, you need to spend time getting very familiar with the GUI.
PT4 – Sub Oscillator – This video will teach you how to use the sub oscillator in Wavetable.
PT5 – Wavetable Categories – This is one of the most important sections of the course. Wavetable comes with over 200 wavetables so the sonic possibilities are nearly endless. This video gives you a crash course on most of the types of wavetables you have access to.
PT6 – Oscillator Effect Modes – Learn how to use these powerful tools to sculpt your sound.
PT7 – Filter Section – Learn everything you need to know about the filters in Wavetable
PT8 – Modulation Sources – This video covers the envelopes and LFO’s in Wavetable
PT9 – Modulation Matrix – This video will teach when and how to use the mod matrix in Wavetable to add a professional polish to any sound.
PT10 – Global Controls and Unison Modes – Learn how to create huge unison sounds in Wavetable as well as other global related controls.

BONUS SECTION – SOUND DESIGN
B01 – Sound Design – Supersaws – Learn some tips and tricks for creating better supersaw sounds in Wavetable
B02 – Sound Design – Pads – This video will give you insight into creating pads in Wavetable
Bo3 – Sound Design – Plucky Basses – Learn how to make plucky basses that will work with a bunch of various genres.
B04 – Sound Design – Add Presence to Any Sound – Learn a great technique that adds sharp presence to the attack of any sound. It will become a go to trick for getting a lead or bass to pop out in the mix!

Regal Loops Excellence 3

By | April 12, 2018

Regal Loops Excellence 3
Size Mb 

‘Excellence 3’ by Regal Loops contains five Construction Kits, with loops and drum one shots to create your own beats and loops. With MIDI files in turn you can grab melodies and drum sets and easily adjust any of your presets to it.

It was created to provide high-end sound for these producers who don’t really want to spend a lot of time looking for effects and still sound professional. Of course if you like to interfere with your productions this product is also for you and it will provide you possibility to evolve your own music style.

Product Details:

• 5 Construction Kits
• 5 Fully Mixed & Mastered Mini-mixes
• 5 MIDI Files
• 24-Bit WAV Quality
• 125 Loops
• 75 One Shots
• Key & Tempo Labelled

Demo Preview:

Samplestar Melodik Pop

By | April 12, 2018

Samplestar Melodik Pop
 MbSize 

Samplestar are very proud to present Melodik Pop!

The sound of hits – In mainstream production it’s all about standout melodic content and memorable catchy top-line hooks.

Rise above this noise with this stunningly crafted production pack focusing on contemporary crossover urban pop.

Packed full with booming kicks, phat bass lines, popping snares and shimmering synths motifs.

All content has been perfectly mixed and eq’d for optimum sonic balance while allowing plenty of extra headroom for further processing and also final mastering stages.

We have also included midi files for all melodic content giving the end producer 100% control to change tempo, velocity or key and also customize the stems to your own exact requirements.

Get that slick pro-sound straight out of the box and take your productions to the next level!

What’s in the pack?

• Full Song Starter Inspiration Kits> 5 huge key labeled track starter kits of combined Drums, Bass, Synth, Melodics & Vocals broken out into individual professionally mixed and mastered wav stems. (Includes full MIDI files).

• One Shot Samples> 20 premium on trend one-shot synth and bass samples ready to be fired up in your favourite sampler.

Download Contains:

• 5 x Full Construction Kits
• 20 x One Shot Samples
• 101 x 24-bit Wav loops / Midi files
• Download size: 286MB (unzipped) 215MB (zipped)

*Other genres that this package may be useful in:

• Dance

Demo Preview:

WA Production InstaChord v1.0.1 Win & Mac

By | April 12, 2018

WA Production InstaChord v1.0.1 Win & Mac

WA Production InstaChord v1.0.1 Win & Mac
Size 42 Mb

Do you have issues creating the perfect chord progression? Are you not keen on music theory enough to know what notes sound good with others? Well, we know your pain. W. A. Production has been a monster in the world of plugins these last few months.

With things like Pumper, Helper, The King and ComBear under our belt, we know exactly what it is that producers need and exactly how to deliver that. We believe we struck GOLD with this new plugin, and we can’t wait to tell you all about it so be prepared. We mentioned before about the struggles of creating amazing chord progressions, well what if there was an amazing recourse that can do that for you with just a click of a note?

We bring you InstaChord! A MIDI Processing Plugin that helps you play chords and chord progressions in a very simple way. InstaChord comes with features like;

– A long list of common chords to choose from (maj, min, sus, etc.)
– ALL chords come with different voicing.
– 24 fretting keys to set and choose chords.
– 24 picking keys to set and play chords.
– Hit the chords with only ONE key or play their notes separately.
– Transpose all the chords up or down at once.
– Customize mapping for fretting and picking keys.

Chord progressions and chords in general are a very important part in all genres of music, especially EDM. EDM having the most dynamic range of chords and elements than most genres. So we get that it is SUPER important to have a catchy and rhythmic chord set up.

InstaChord adds a major ease to creating these catchy chords by basically doing it for you but allowing you to 100% customize how the chords are strummed, what notes are in the progression, velocity, and the octave you want it set it. Below are some of the features that InstaChord comes with with a few details on them.

Though Chords on keyboards and guitars are voiced a bit differently due to the string tuning and their orders, InstaChord includes different chord voicing modes and at this current moment keyboard and guitar modes are available.

InstaChord has this amazing ability that if the key of the track changes, you can use the transpose buttons to move all the chords up and down. Another amazing thing is you can also bypass the process if you need to play the target instrument in a normal way. InstaChord also comes with an amazing variety of Presets to choose from.

2 Different Keyboards

InstaChord comes with this amazing Keyboard that is basically 2 different types of keyboards. We included this for a number of reasons, however the main one is because you need to know the difference between the note or notes you are actually playing on either you MIDI Keyboard or Computer Keyboard versus the Chords and Action that InstaChord is putting out via your customization. That’s basically what the difference is, one section is the physical notes you are playing, the other is the Chord(s) and Action you set InstaChord to play!

Change Modes

InstaChord comes with this amazing tool bar at the top of the plugin. In this section you are able to do some amazing things to the plugin overall to make things a little more unique. For example, you can change InstaChord’s overall octave either up or down. You can adjust the Hold Mode to either Pick or Fret, you can change the MIDI mode between Process or Pass, and (I don’t know what the C1 means.)

Chord A and Chord B Sections

InstaChord is stocked with two sets of Chord sections, Chords A and Chords B. Both of these sections have 12 keys that allows you to change the Root Note, the Chord, Voicing and the Octave inside each key. This will be activated when that key is played. Both of the Chord Sections have different ranges, for example Chords A ranges from C3-B3, and Chord B ranges from C4-B4.

Fretting Keys

InstaChord comes with the amazing ability to fret chords. There are 12 sets of menus for each chord group, and they are ordered from bottom (C) to top (B) like the piano roll from your host. Each set has 4 menus and they can be used to set the chords. Here is a more details list;

– A: Chord Root (C, C#, etc.)
– B: Chord Mode (Major, Minor, etc.)
– C: Chord Voicing. Here you can select a voicing mode for chords. These modes have the same notes but in slightly different orders.
– D: Chord Octave.
– E: Use the LED switch to select the chord by mouse.

InstaChord is going to change the world of writing chords. The simple layout and detailed customization of each progression makes InstaChord a must have plugin. It will speed the process of your track writing up like crazy while still allowing you to add your creative flow.

Action Section

The sections Picks A and Picks B display keys from the selected octave (C5-B5 and C6-B6). The same for Chords A and Chords B, however in these sections you can select how you want the chords that you set in the Chords A and Chords B section to be played. You have choices like Strum Up or Down, Fast or Slow, Only Certain Notes etc. After you have this section adjusted to your favor, you can hit the Chords Key and the Pick Key and you will get the chord with the selected progression.

Picking Keys

InstaChord also comes with the ability of picking keys. This is where you can set the action for picking keys. Like the chord group, these menus are ordered from bottom to top representing an octave for each pick group. There is so much more to Picking Keys like;

– Hit: Plays all the notes of the chord at once. You can choose any combination of the 6 notes of the chord.
– Strum: These actions will strum the chords up or down with different speeds and any combination of the six notes.
– Bass: Plays the root note of the chord but one octave lower than the reset.
– 1st, 6th Notes: These keys play individual notes of the chord. Depending on the voicing mode they may have different values but the first note is usually the root. You can see the notes on the keyboard and display panel.
– Octave -/+: Use these keys to shift the octave up or down using MIDI notes.
– Transpose -/+: Use these keys to transpose the chords up or down.
– All Notes OFF: It does what it says, sends an off message for all of the notes.

InstaChord has some other minor and somewhat hidden features like the following;

– Transpose: Use these buttons to shift all the chords up or down. This is extremely handy when you want to transpose the current chord progression to another key!
– C1: Note names may vary from one host to another. For example, FL Studio names MIDI Note #0, C (0), and Logic Pro names it C(-2). Use this parameter to match the names on the plug-in with your DAW and eliminate the confusion.
– Menu: You can SAVE or LOAD presets and access the “About Page”. InstaChord comes with a crazy amount of presets already, so if you can create your own you have a ton to choose from. You can also switch to the “About Page” by clicking on the InstaChord Logo.
– Output Keyboard and Display Panel: Here you can see the current chord and its notes. These notes are painted blue on the keyboard too, they turn green while playing. You can also use the mouse to play.

And MANY more features that you can check out in InstaChord itself and its Manual!

InstaChord can be used in DAW’s (Digital Audio Workstation) like Ableton, FL Studio, Logic Pro X, Cubase and MORE! The team at W. A. Production are super excited to release this beast to the masses of beginner or professional producers all around the world. If we haven’t convinced you enough, you can try InstaChord for free with our demo. But, we are fairly certain you will want to pick up this innovative and incredible MIDI Processing Plugin. Thank you to everyone who grabs a copy of InstaChord, we hope you enjoy and create some amazing music!

Requirements:

Windows:

– Windows 7 and later (32/64 bit)
– VST

Mac

– OSX 10.7. and later (32/64 bit)
– VST, AU

Compatibility:

Windows

– FL Studio 12
– Cubase 9.5
– Studio One 3
– Ableton Live 9
– Maschine 2 – No MIDI routing
– Reason – No MIDI routing

Mac

– Cubase 9.5
– Studio One 3
– Ableton Live 9
– Logic Pro X
– Maschine 2 – No MIDI routing
– Reason – OK – No MIDI routing

Cr2 Records Deep Tech Tronica

By | April 11, 2018

Cr2 Records Deep Tech Tronica

Cr2 Records Deep Tech Tronica
Size 400 Mb

Following on from the success of our underground production toolkits, Sample Tools by Cr2 are supremely thrilled to present to you a pack consisting of indispensable Audio, MIDI, Presets and Tutorial Files hand crafted for real fans of electronic music.

This timeless collection of exclusive sounds also features over 20 different vocal parts to offer you full flexibility.

Introducing… Deep Tech-Tronica!

Expect to find the richest and highest quality production content, appropriate for everything – from House and Techno all the way to Ambient and Electronica.

This live and loud collection of analogue recorded sounds are the perfect production tools to drive the dance floor into a frenzy!

And best of all… Everything is 100% royalty free.

‘The content in this toolkit really has got a sound of it’s own. Genius!’

Inspired by the sounds of Bicep, Ejeca, Brassica, Sandboards, Hammer, Dusky and loads more… Deep Tech-Tronica isn’t just a sample pack but is an essential resource to help music producers learn, grow and create.

If you’re looking for a total production toolkit that will teach and help you learn in the studio as well as inspire you.

Then this is for you!

We are Sample Tools by Cr2 and this is Deep Tech-Tronica!

WHAT YOU GET:

• Total File Size: 507MB (Zipped)
• Total Audio Files: 371
• Total MIDI Files: 58
• 120 x Drum Loops
• 10 x Bass Hits (Key Labeled)
• 20 x Bass Loops (Key / BPM Labeled)
• 20 x Kicks (Key Labeled)
• 20 x Claps
• 10 x Crashes
• 10 x Hats
• 10 x Open Hats
• 10 x Rides
• 15 x Perc
• 20 x Snare
• 20 x FX
• 40 x MIDI (Key / BPM Labeled)
• 20 x Synth Loops (Key / BPM Labeled)
• 15 x Presets (Sylenth Bank)
• 5 x Songstarter (Key / BPM Labeled) (66 Audio Files / 18 MIDI Files – INCLUDES VOCALS!)
• 3 x Prod-Cast Video Tutorials
• 1 x Mike Monday Studio Productivity Video
• 1 x Budi Voogt Art of Pitching Video
• 1 x Production Booklet

*Other genres that this package may be useful in:

• Drums
• Presets / Patches
• Sound FX
• Tech House
• Tutorials

Demo Preview:

Cymatics Wait For Me Trap Project File – Ableton FL Studio Logic

By | April 11, 2018

Cymatics Wait For Me Trap Project File - Ableton FL Studio Logic

Cymatics Wait For Me Trap Project File
Size 314 Mb

What goes through your mind when you hear “trap”?

Is it the dark melodies artists like Ekali are known for?

Or maybe it’s the energy that is present in just about every Boombox Cartel song.

One thing that IS present and synonymous with trap music though, is a strong low end.

However, that’s something a lot of amateur producers struggle with…
What if we told you we had a resource so great, that it had all THREE of these mind-blowing elements, and more!?

“Wait For Me” is an incredibly intense trap project file – filled to the brim with professional secrets that cover everything from sound design, mixing and mastering, writing, and the best of all: a MASSIVE low end!

Created meticulously by one of the best producers on our production team, this project has seen hours upon hours of work poured into it – all to ensure a professional quality project file that YOU can learn from!

Diving into this project will show you how each sound was made, the processing in order to achieve a full, wide, powerful mix, and every little detail that went into the writing.

You’ll have full access to years of knowledge, all at your fingertips..

So, what are you waiting for? Download the “Wait For Me” project file collection now!

Included in this pack:

“Wait For Me” Ableton Project File
“Wait For Me” FL Studio Project File
“Wait For Me” Logic Project File
Specifications:
Format: .ALS / .LOGIC / .FLP
File Size (Zipped): 566.4 MB
File Count: 1 Project File (Ableton, Logic, FL Studio)

Psytrance Production in Logic Pro

By | April 11, 2018

Psytrance Production in Logic Pro
Size 1.6 Gb

Psytrance is one of the most distinctive styles of electronic music, characterised by its psychedelic, spiritual atmosphere and high tempo, driving rhythms. This new course from Re:Creation provides all the knowledge needed to create your own futuristic psytrance tunes from scratch.

Adam Goodlet has been creating music for over 15 years and currently operates the Re:Creation studio facility in the UK, which provides music production, video editing, online mastering and tuition services. He produces both under his OverSoul and Re:Creation aliases, with the latter being a live act focusing on genre-bending psychedelic music. As Re:Creation, Adam released his acclaimed Infinite Expansions album, with the title track hitting #4 on the Beatport psytrance chart. Re:Creation continues to be a creative outlet for some of the most forward thinking psychedelic music out there.

In this set of tutorials, Re:Creation shares with you his extensive knowledge of psytrance production, making an epic track from start to finish. The first few modules show how to create the basic elements; kick, bass, percussion, evolving pads and futuristic glitchy lead sounds, with a focus on getting the best out of Logic Pro X plugins Alchemy and ES2. The later modules then go on to discuss the arrangement, using a multitude of advanced automation techniques and effects to blend sections together and create variation. The course concludes with an hour-long bonus module featuring Re:Creation tweaking the mix to produce a professional-sounding end result.

The course is available to stream immediately after purchase and can be watched 24/7/365. Accompanying the tutorials is the Logic project and 100MB of bonus psytrance samples, courtesy of Loopmasters. For more information, check out the sample mod and track from the course below.

Sample module:

Track from the course:

Module 1 – Intro

Re:Creation kicks off the course by discussing the content in the upcoming modules.

Module 2 – Getting Started

This lesson shows how to download the Bazzism plugin, and the basic setup for the Logic Pro X Project.

Module 3 – Kick and Bass

This module teaches how to synthesise kick drums in the Bazzism plugin, and how to create a classic psytrance bassline using Logic’s Retro Synth.

Module 4 – Percussion

Re:Creation adds a shuffling stereo hi hat pattern, a classic 909 snare and a gritty percussion loop.

Module 5 – Lead Synths

This video shows the creation of four different lead sounds using both ES2 and alchemy, in order to create interesting and varied phrases. The leads are processed with a combination of reverb and delay.

Module 6 – Creating a Pad with Alchemy

In this module, Re:Creation guides you through the sound design processes involved in making an evolving pad with the powerful Alchemy synth.

Module 7 – Main Lead

This lesson walks you through the creation of a heavily modulated lead synth sequence in Alchemy.

Module 8 – Mixdown

Tweaks With all the leads now in place, Re:Creation tweaks the mix, including adding parallel compression to tighten the drums.

Module 9 – Risers and White Noise

This module teaches how to make two common psytrance effects in ES2, the riser and filtered white noise.

Module 10 – Adding Interest to Leads

Revisiting the leads, some processing is added to add more unique character to the sounds, including distortion and delay designer.

Module 11 – Arrangement Part 1

With the main basis of the track in place, Re:Creation starts to create an arrangement, showing how to use filter automation in order to fade in elements of the track.

Module 12 – Intro Arrangement Part 1

This module gives some tips and tricks on structuring the intro for the track, including automating delays to blend sections together.

Module 13 – Intro Arrangement Part 2

This video shows how to create audio bounces from sections of the lead part, and chop them up with automation to create interesting sounds and effects.

Module 14 – Developing the Lead Sounds

A ringshifter effect is added to the intro lead, and the main lead is bounced down and sliced up to create interesting glitchy effects.

Module 15 – Automating the Leads

Re:Creation adds more automation to a multitude of effects parameters, creating more complex variation in the lead parts.

Module 16 – The Drop

This module teaches how to structure the drop, adding an extra pad layers and a thunderous sub in order to ensure maximum impact.

Module 17 – The Second Drop

In this lesson Re:Creation takes a look at creating an effective second drop, ensuring it varies from the first.

Module 18 – Wrapping Up The Arrangement

The main structure of the track is completed with a few tweaks and the addition of some reverse reverb effects to smooth the transitions between sections.

Module 19 – Mix and Master

With the arrangement complete, Re:Creation takes a look at cleaning up the mix with the use of EQ and compression. The module also discusses some quick mastering tips using the adaptive limiter.

Module 20 – Bonus Module

This hour long bonus module gives you a chance to see Re:Creation tweaking the track even further, adding some new sounds and processing to really take it to the next level.

MSXII Sound Sir Magic Jonezy Hooks WAV

By | April 11, 2018

MSXII Sound Sir Magic Jonezy Hooks WAV

MSXII Sound Sir Magic Jonezy Hooks WAV
Size 112 Mb

MSXII Sound Design is proud to present Sir Magic Jonezy Hooks! In collaboration with our long time pal, Tone Jonez, we’ve created a vocal samples masterpiece. 56 total ideas ranging from full hooks, harmonious phrases, vocal chants, melodic one-liners and much more! This pack is extremely colorful and ready for chopping and use within your production!

Built with great, high end microphone and preamp recording chains such as the Neumann U87AI, Manley Reference Cardioid, Shure Sm57, and the fun Yamaha VSS-30 Sampler. Then treated and processed with the Great River ME-1NV, Avalon M5 pres, Warm Audio WA76 compressor, and then finally hitting the Apogee AD16x converter. These vocals are sure to bring out colors, textures, and tones your music hasn’t heard. You’ll want to chop these, or use as is with BPM labeled for easy drag & drop manipulation! Cop the first installment of the Sir Magic Jonezy Hooks and win! Champs only!

*Contact us with your inquiries on clearance for commercial use*

Kit Features:

56 original vocal hooks, phrases, melodic chants, harmonies and more in 24 bit .wav format
Files labeled by BPM for easy manipulation with in your music production
Analog recording chains with high end pre’ such as the Neumann U87AI, Avalon M5, Warm Audio WA76 and more for the highest quality in sound detail
Chop, flip, use as is, and get creative! These ideas are meant for inspiration
Expertly mixed with headroom ready to work immediately in your production
Compatible with all DAWs, samplers, & iOS devices/apps that accept .wav format

Demo Preview:

Big EDM Sounds Of EDM

By | April 11, 2018

Big EDM Sounds Of EDM

Big EDM Sounds Of EDM
Size 328 Mb

‘Sounds of EDM’ from Big EDM is a phenomenal pack that includes 9 super-fat Construction Kits, 4 FL Studio templates, 200 Drum Samples and 125 Presets.

Instant inspiration and top-notch sounds are guaranteed.

We‘ve prepared some recreations of original tracks with templates so you can go through the whole projects and see how all sounds were made from scratch.

We were using mainly FL Studio native effect plugins, to be sure you will be able to load the templates to your DAWs.

Also included are 3 original construction kits, that you can use however you want.

Together with these awesome kits you will find also 100 kick and 100 clap samples.

As a “bonus“ we’ve included also 85 Sylenth1, 19 Spire and 20 NI Massive presets.

The sounds of Blasterjaxx, Bassjackers, KSHMR, Ummet Ozcan, Martin Garrix, Alvaro and others can be heard in this ultra-relevant pack.

Let these Kits inspire you or simply use the original tracks and samples as they are mixed now.

Product Includes:

• 9 Construction Kits
• 4 FL Studio Templates
• 85 Sylenth1 Presets
• 20 NI Massive Presets
• 19 Spire Presets
• 100 Kick Samples
• 100 Clap Samples

*Other genres that this package may be useful in:

• Drum Hits
• House
• MIDI
• Presets / Patches
• Progressive House

Demo Preview: